For those who have purchased a do-it-yourself iPhone repair kit, it is not uncommon to discover a couple of snags through the iPhone repair process. Relax, these are generally easily avoided or corrected with the appropriate instructions along with the right tools. If you haven’t yet begun the iPhone repair process, it’s a good option to see through this post to know the commonest issues that sometimes arise in order to prevent them altogether.

It is essential to remember when performing DIY iPhone repair is to purchase quality repair parts. Be sure you only buy a repair kit from your trustworthy source with guaranteed parts. Using parts that aren’t guaranteed will still only cause more difficulty with your iPhone over time. Trusted iPhone repair shops will offer you with a complete repair kit that includes the top parts and tools, detailed instructions, customer service if you happen to encounter any issues, as well as a warranty.

Allow me to share the commonest iPhone 4 repair issues:

Antenna Issues

Should you finish restoring your iPhone only to find your phone does not have any signal, it could be a problem with all the antenna. On occasions when the antenna is disconnected the metal around the antenna connection could get slightly bent.

bang gia thay man hinh iphone with a nylon spudger to gently complete the metal before trying to reconnect the antenna again.

When reattaching the antenna here are a few things to take into account:

– Remember, you can find four teeth that should be correctly placed directly under the apple iphone 4g frame

– Guarantee the screw holding together the speaker assembly is screwed down tightly

– Check that the antenna wire is securely clipped recorded on the logic board

If you are still not getting an indication, try resetting your network connections.

Logic Board Issues

In case you are experiencing difficulty taking off the logic board, it’s possible that doesn’t all of the screws happen to be removed. The logic board is held in position by three screws and the SIM card. Among the three screws is included by a white water sensor. The SIM card will hold the logic board in place even if the screws are already removed. To only sign up for the Sim work with a thumb tack or paper clip to carefully press in for the SIM card tray and this will slide out.

To safely get rid of the logic board it’s always best to start with the base and gently raise. Remember, you’ll find 6 connections that must be unclipped in the logic board before it is removed. Make certain that the logic board doesn’t touch the antenna connection during the iPhone repair process.

iphone4 Battery Replacement

When replacing battery within your iPhone, make sure to NOT use any metal instruments when removing the electrical connection. This may increase the risk for electrical connection short circuiting. Instead work with a nylon spudger often contained in iPhone repair kits.

When treatment of battery, the plastic pull tab sometimes tears off. Utilizing a tool this kind of nylon spudger as being a lever to gently pry the battery out works better.

If you discover your iPhone is not going to start after performing iPhone repair, first, check to make sure that the battery is securely connected. In the event the battery was reattached properly, try a hard reset on the phone (press and contain the Sleep/Wake button along with the Home button for Around 10 secs before Apple logo appears). If this does not correct the issue, plug your phone in to the power outlet or connect with iTunes.

More information about
thay man hinh iphone bao lau check our internet page.